oauth2_proxy/CHANGELOG.md

Vx.x.x (Pre-release)

Breaking Changes

• #186 Make config consistent

  • This PR changes configuration options so that all flags have a config counterpart of the same name but with underscores (_) in place of hyphens (-). This change affects the following flags:
  • The --tls-key flag is now --tls-key-file to be consistent with existing file flags and the existing config and environment settings
  • The --tls-cert flag is now --tls-cert-file to be consistent with existing file flags and the existing config and environment settings This change affects the following existing configuration options:
  • The proxy-prefix option is now proxy_prefix. This PR changes environment variables so that all flags have an environment counterpart of the same name but capitalised, with underscores (_) in place of hyphens (-) and with the prefix OAUTH2_PROXY_. This change affects the following existing environment variables:
  • The OAUTH2_SKIP_OIDC_DISCOVERY environment variable is now OAUTH2_PROXY_SKIP_OIDC_DISCOVERY.
  • The OAUTH2_OIDC_JWKS_URL environment variable is now OAUTH2_PROXY_OIDC_JWKS_URL.

• #146 Use full email address as User if the auth response did not contain a User field (@gargath)

  • This change modifies the contents of the X-Forwarded-User header supplied by the proxy for users where the auth response from the IdP did not contain a username. In that case, this header used to only contain the local part of the user's email address (e.g. john.doe for john.doe@example.com) but now contains the user's full email address instead.

• #170 Pre-built binary tarballs changed format

  • The pre-built binary tarballs again match the format of the bitly repository, where the unpacked directory has the same name as the tarball and the binary is always named oauth2_proxy. This was done to restore compatibility with third-party automation recipes like https://github.com/jhoblitt/puppet-oauth2_proxy.

Changes since v3.2.0

• #224 Check Google group membership using hasMember to support nested groups and external users (@jpalpant)

• #178 Add Silence Ping Logging and Exclude Logging Paths flags (@kskewes)

• #209 Improve docker build caching of layers (@dekimsey)

• #186 Make config consistent (@JoelSpeed)

• #187 Move root packages to pkg folder (@JoelSpeed)

• #65 Improvements to authenticate requests with a JWT bearer token in the Authorization header via the -skip-jwt-bearer-token options.

  • Additional verifiers can be configured via the -extra-jwt-issuers flag if the JWT issuers is either an OpenID provider or has a JWKS URL (e.g. https://example.com/.well-known/jwks.json).

• #180 Minor refactor of core proxying path (@aeijdenberg).

• #175 Bump go-oidc to v2.0.0 (@aeijdenberg).

  • Includes fix for potential signature checking issue when OIDC discovery is skipped.

• #155 Add RedisSessionStore implementation (@brianv0, @JoelSpeed)

  • Implement flags to configure the redis session store
    • -session-store-type=redis Sets the store type to redis
    • -redis-connection-url Sets the Redis connection URL
    • -redis-use-sentinel=true Enables Redis Sentinel support
    • -redis-sentinel-master-name Sets the Sentinel master name, if sentinel is enabled
    • -redis-sentinel-connection-urls Defines the Redis Sentinel Connection URLs, if sentinel is enabled
  • Introduces the concept of a session ticket. Tickets are composed of the cookie name, a session ID, and a secret.
  • Redis Sessions are stored encrypted with a per-session secret
  • Added tests for server based session stores

• #168 Drop Go 1.11 support in Travis (@JoelSpeed)

• #169 Update Alpine to 3.9 (@kskewes)

• #148 Implement SessionStore interface within proxy (@JoelSpeed)

• #147 Add SessionStore interfaces and initial implementation (@JoelSpeed)

  • Allows for multiple different session storage implementations including client and server side
  • Adds tests suite for interface to ensure consistency across implementations
  • Refactor some configuration options (around cookies) into packages

• #114, #154 Documentation is now available live at our docs website (@JoelSpeed, @icelynjennings)

• #146 Use full email address as User if the auth response did not contain a User field (@gargath)

• #144 Use GO 1.12 for ARM builds (@kskewes)

• #142 ARM Docker USER fix (@kskewes)

• #52 Logging Improvements (@MisterWil)

  • Implement flags to configure file logging
    • -logging-filename Defines the filename to log to
    • -logging-max-size Defines the maximum
    • -logging-max-age Defines the maximum age of backups to retain
    • -logging-max-backups Defines the maximum number of rollover log files to retain
    • -logging-compress Defines if rollover log files should be compressed
    • -logging-local-time Defines if logging date and time should be local or UTC
  • Implement two new flags to enable or disable specific logging types
    • -standard-logging Enables or disables standard (not request or auth) logging
    • -auth-logging Enables or disables auth logging
  • Implement two new flags to customize the logging format
    • -standard-logging-format Sets the format for standard logging
    • -auth-logging-format Sets the format for auth logging

• #111 Add option for telling where to find a login.gov JWT key file (@timothy-spencer)

• #170 Restore binary tarball contents to be compatible with bitlys original tarballs (@zeha)

• #185 Fix an unsupported protocol scheme error during token validation when using the Azure provider (@jonas)

• #141 Check google group membership based on email address (@bchess)

  • Google Group membership is additionally checked via email address, allowing users outside a GSuite domain to be authorized.

• #195 Add -banner flag for overriding the banner line that is displayed (@steakunderscore)

• #198 Switch from gometalinter to golangci-lint (@steakunderscore)

• #159 Add option to skip the OIDC provider verified email check: --insecure-oidc-allow-unverified-email

• #210 Update base image from Alpine 3.9 to 3.10 (@steakunderscore)

• #211 Switch from dep to go modules (@steakunderscore)

v3.2.0

Release highlights

• Internal restructure of session state storage to use JSON rather than proprietary scheme
• Added health check options for running on GCP behind a load balancer
• Improved support for protecting websockets
• Added provider for login.gov
• Allow manual configuration of OIDC providers

Important notes

• Dockerfile user is now non-root, this may break your existing deployment
• In the OIDC provider, when no email is returned, the ID Token subject will be used instead of returning an error
• GitHub user emails must now be primary and verified before authenticating

Changes since v3.1.0

• #96 Check if email is verified on GitHub (@caarlos0)
• #110 Added GCP healthcheck option (@timothy-spencer)
• #112 Improve websocket support (@gyson)
• #63 Use encoding/json for SessionState serialization (@yaegashi)
  • Use JSON to encode session state to be stored in browser cookies
  • Implement legacy decode function to support existing cookies generated by older versions
  • Add detailed table driven tests in session_state_test.go
• #120 Encrypting user/email from cookie (@costelmoraru)
• #55 Added login.gov provider (@timothy-spencer)
• #55 Added environment variables for all config options (@timothy-spencer)
• #70 Fix handling of splitted cookies (@einfachchr)
• #92 Merge websocket proxy feature from openshift/oauth-proxy (@butzist)
• #57 Fall back to using OIDC Subject instead of Email (@aigarius)
• #85 Use non-root user in docker images (@kskewes)
• #68 forward X-Auth-Access-Token header (@davidholsgrove)
• #41 Added option to manually specify OIDC endpoints instead of relying on discovery
• #83 Add id_token refresh to Google provider (@leki75)
• #10 fix redirect url param handling (@dt-rush)
• #122 Expose -cookie-path as configuration parameter (@costelmoraru)
• #124 Use Go 1.12 for testing and build environments (@syscll)

v3.1.0

Release highlights

• Introduction of ARM releases and and general improvements to Docker builds
• Improvements to OIDC provider allowing pass-through of ID Tokens
• Multiple redirect domains can now be whitelisted
• Streamed responses are now flushed periodically

Important notes

• If you have been using #bitly/621 and have cookies larger than the 4kb limit, the cookie splitting pattern has changed and now uses _ in place of - when indexing cookies. This will force users to reauthenticate the first time they use v3.1.0.
• Streamed responses will now be flushed every 1 second by default. Previously streamed responses were flushed only when the buffer was full. To retain the old behaviour set --flush-interval=0. See #23 for further details.

Changes since v3.0.0

• #14 OIDC ID Token, Authorization Headers, Refreshing and Verification (@joelspeed)
  • Implement pass-authorization-header and set-authorization-header flags
  • Implement token refreshing in OIDC provider
  • Split cookies larger than 4k limit into multiple cookies
  • Implement token validation in OIDC provider
• #15 WhitelistDomains (@joelspeed)
  • Add --whitelist-domain flag to allow redirection to approved domains after OAuth flow
• #21 Docker Improvement (@yaegashi)
  • Move Docker base image from debian to alpine
  • Install ca-certificates in docker image
• #23 Flushed streaming responses
  • Long-running upstream responses will get flushed every (1 second by default)
• #24 Redirect fix (@agentgonzo)
  • After a successful login, you will be redirected to your original URL rather than /
• #35 arm and arm64 binary releases (@kskewes)
  • Add armv6 and arm64 to Makefile release target
• #37 cross build arm and arm64 docker images (@kskewes)

v3.0.0

Adoption of OAuth2_Proxy by Pusher. Project was hard forked and tidied however no logical changes have occurred since v2.2 as released by Bitly.

Changes since v2.2:

• #7 Migration to Pusher (@joelspeed)
  • Move automated build to debian base image
  • Add Makefile
    • Update CI to run make test
    • Update Dockerfile to use make clean oauth2_proxy
    • Update VERSION parameter to be set by ldflags from Git Status
    • Remove lint and test scripts
  • Remove Go v1.8.x from Travis CI testing
  • Add CODEOWNERS file
  • Add CONTRIBUTING guide
  • Add Issue and Pull Request templates
  • Add Dockerfile
  • Fix fsnotify import
  • Update README to reflect new repository ownership
  • Update CI scripts to separate linting and testing
    • Now using gometalinter for linting
  • Move Go import path from github.com/bitly/oauth2_proxy to github.com/pusher/oauth2_proxy
  • Repository forked on 27/11/18
    • README updated to include note that this repository is forked
    • CHANGLOG created to track changes to repository from original fork