oauth2_proxy/CHANGELOG.md
Henry Jenkins bc81a0f6e4 Merge branch 'master' into go-mod
* master:
  Move docker dep commands to earlier in the build
2019-07-15 21:38:55 +01:00

198 lines
13 KiB
Markdown

# Vx.x.x (Pre-release)
## Breaking Changes
- [#186](https://github.com/pusher/oauth2_proxy/pull/186) Make config consistent
- This PR changes configuration options so that all flags have a config counterpart
of the same name but with underscores (`_`) in place of hyphens (`-`).
This change affects the following flags:
- The `--tls-key` flag is now `--tls-key-file` to be consistent with existing
file flags and the existing config and environment settings
- The `--tls-cert` flag is now `--tls-cert-file` to be consistent with existing
file flags and the existing config and environment settings
This change affects the following existing configuration options:
- The `proxy-prefix` option is now `proxy_prefix`.
This PR changes environment variables so that all flags have an environment
counterpart of the same name but capitalised, with underscores (`_`) in place
of hyphens (`-`) and with the prefix `OAUTH2_PROXY_`.
This change affects the following existing environment variables:
- The `OAUTH2_SKIP_OIDC_DISCOVERY` environment variable is now `OAUTH2_PROXY_SKIP_OIDC_DISCOVERY`.
- The `OAUTH2_OIDC_JWKS_URL` environment variable is now `OAUTH2_PROXY_OIDC_JWKS_URL`.
- [#146](https://github.com/pusher/oauth2_proxy/pull/146) Use full email address as `User` if the auth response did not contain a `User` field (@gargath)
- This change modifies the contents of the `X-Forwarded-User` header supplied by the proxy for users where the auth response from the IdP did not contain
a username.
In that case, this header used to only contain the local part of the user's email address (e.g. `john.doe` for `john.doe@example.com`) but now contains
the user's full email address instead.
- [#170](https://github.com/pusher/oauth2_proxy/pull/170) Pre-built binary tarballs changed format
- The pre-built binary tarballs again match the format of the [bitly](https://github.com/bitly/oauth2_proxy) repository, where the unpacked directory
has the same name as the tarball and the binary is always named `oauth2_proxy`. This was done to restore compatibility with third-party automation
recipes like https://github.com/jhoblitt/puppet-oauth2_proxy.
## Changes since v3.2.0
- [#209](https://github.com/pusher/outh2_proxy/pull/209) Improve docker build caching of layers (@dekimsey)
- [#186](https://github.com/pusher/oauth2_proxy/pull/186) Make config consistent (@JoelSpeed)
- [#187](https://github.com/pusher/oauth2_proxy/pull/187) Move root packages to pkg folder (@JoelSpeed)
- [#65](https://github.com/pusher/oauth2_proxy/pull/65) Improvements to authenticate requests with a JWT bearer token in the `Authorization` header via
the `-skip-jwt-bearer-token` options.
- Additional verifiers can be configured via the `-extra-jwt-issuers` flag if the JWT issuers is either an OpenID provider or has a JWKS URL
(e.g. `https://example.com/.well-known/jwks.json`).
- [#180](https://github.com/pusher/outh2_proxy/pull/180) Minor refactor of core proxying path (@aeijdenberg).
- [#175](https://github.com/pusher/outh2_proxy/pull/175) Bump go-oidc to v2.0.0 (@aeijdenberg).
- Includes fix for potential signature checking issue when OIDC discovery is skipped.
- [#155](https://github.com/pusher/outh2_proxy/pull/155) Add RedisSessionStore implementation (@brianv0, @JoelSpeed)
- Implement flags to configure the redis session store
- `-session-store-type=redis` Sets the store type to redis
- `-redis-connection-url` Sets the Redis connection URL
- `-redis-use-sentinel=true` Enables Redis Sentinel support
- `-redis-sentinel-master-name` Sets the Sentinel master name, if sentinel is enabled
- `-redis-sentinel-connection-urls` Defines the Redis Sentinel Connection URLs, if sentinel is enabled
- Introduces the concept of a session ticket. Tickets are composed of the cookie name, a session ID, and a secret.
- Redis Sessions are stored encrypted with a per-session secret
- Added tests for server based session stores
- [#168](https://github.com/pusher/outh2_proxy/pull/168) Drop Go 1.11 support in Travis (@JoelSpeed)
- [#169](https://github.com/pusher/outh2_proxy/pull/169) Update Alpine to 3.9 (@kskewes)
- [#148](https://github.com/pusher/outh2_proxy/pull/148) Implement SessionStore interface within proxy (@JoelSpeed)
- [#147](https://github.com/pusher/outh2_proxy/pull/147) Add SessionStore interfaces and initial implementation (@JoelSpeed)
- Allows for multiple different session storage implementations including client and server side
- Adds tests suite for interface to ensure consistency across implementations
- Refactor some configuration options (around cookies) into packages
- [#114](https://github.com/pusher/oauth2_proxy/pull/114), [#154](https://github.com/pusher/oauth2_proxy/pull/154) Documentation is now available live at our [docs website](https://pusher.github.io/oauth2_proxy/) (@JoelSpeed, @icelynjennings)
- [#146](https://github.com/pusher/oauth2_proxy/pull/146) Use full email address as `User` if the auth response did not contain a `User` field (@gargath)
- [#144](https://github.com/pusher/oauth2_proxy/pull/144) Use GO 1.12 for ARM builds (@kskewes)
- [#142](https://github.com/pusher/oauth2_proxy/pull/142) ARM Docker USER fix (@kskewes)
- [#52](https://github.com/pusher/oauth2_proxy/pull/52) Logging Improvements (@MisterWil)
- Implement flags to configure file logging
- `-logging-filename` Defines the filename to log to
- `-logging-max-size` Defines the maximum
- `-logging-max-age` Defines the maximum age of backups to retain
- `-logging-max-backups` Defines the maximum number of rollover log files to retain
- `-logging-compress` Defines if rollover log files should be compressed
- `-logging-local-time` Defines if logging date and time should be local or UTC
- Implement two new flags to enable or disable specific logging types
- `-standard-logging` Enables or disables standard (not request or auth) logging
- `-auth-logging` Enables or disables auth logging
- Implement two new flags to customize the logging format
- `-standard-logging-format` Sets the format for standard logging
- `-auth-logging-format` Sets the format for auth logging
- [#111](https://github.com/pusher/oauth2_proxy/pull/111) Add option for telling where to find a login.gov JWT key file (@timothy-spencer)
- [#170](https://github.com/pusher/oauth2_proxy/pull/170) Restore binary tarball contents to be compatible with bitlys original tarballs (@zeha)
- [#185](https://github.com/pusher/oauth2_proxy/pull/185) Fix an unsupported protocol scheme error during token validation when using the Azure provider (@jonas)
- [#141](https://github.com/pusher/oauth2_proxy/pull/141) Check google group membership based on email address (@bchess)
- Google Group membership is additionally checked via email address, allowing users outside a GSuite domain to be authorized.
- [#195](https://github.com/pusher/outh2_proxy/pull/195) Add `-banner` flag for overriding the banner line that is displayed (@steakunderscore)
- [#198](https://github.com/pusher/outh2_proxy/pull/198) Switch from gometalinter to golangci-lint (@steakunderscore)
- [#159](https://github.com/pusher/oauth2_proxy/pull/159) Add option to skip the OIDC provider verified email check: `--insecure-oidc-allow-unverified-email`
- [#210](https://github.com/pusher/oauth2_proxy/pull/210) Update base image from Alpine 3.9 to 3.10 (@steakunderscore)
- [#211](https://github.com/pusher/oauth2_proxy/pull/211) Switch from dep to go modules (@steakunderscore)
# v3.2.0
## Release highlights
- Internal restructure of session state storage to use JSON rather than proprietary scheme
- Added health check options for running on GCP behind a load balancer
- Improved support for protecting websockets
- Added provider for login.gov
- Allow manual configuration of OIDC providers
## Important notes
- Dockerfile user is now non-root, this may break your existing deployment
- In the OIDC provider, when no email is returned, the ID Token subject will be used
instead of returning an error
- GitHub user emails must now be primary and verified before authenticating
## Changes since v3.1.0
- [#96](https://github.com/bitly/oauth2_proxy/pull/96) Check if email is verified on GitHub (@caarlos0)
- [#110](https://github.com/pusher/oauth2_proxy/pull/110) Added GCP healthcheck option (@timothy-spencer)
- [#112](https://github.com/pusher/oauth2_proxy/pull/112) Improve websocket support (@gyson)
- [#63](https://github.com/pusher/oauth2_proxy/pull/63) Use encoding/json for SessionState serialization (@yaegashi)
- Use JSON to encode session state to be stored in browser cookies
- Implement legacy decode function to support existing cookies generated by older versions
- Add detailed table driven tests in session_state_test.go
- [#120](https://github.com/pusher/oauth2_proxy/pull/120) Encrypting user/email from cookie (@costelmoraru)
- [#55](https://github.com/pusher/oauth2_proxy/pull/55) Added login.gov provider (@timothy-spencer)
- [#55](https://github.com/pusher/oauth2_proxy/pull/55) Added environment variables for all config options (@timothy-spencer)
- [#70](https://github.com/pusher/oauth2_proxy/pull/70) Fix handling of splitted cookies (@einfachchr)
- [#92](https://github.com/pusher/oauth2_proxy/pull/92) Merge websocket proxy feature from openshift/oauth-proxy (@butzist)
- [#57](https://github.com/pusher/oauth2_proxy/pull/57) Fall back to using OIDC Subject instead of Email (@aigarius)
- [#85](https://github.com/pusher/oauth2_proxy/pull/85) Use non-root user in docker images (@kskewes)
- [#68](https://github.com/pusher/oauth2_proxy/pull/68) forward X-Auth-Access-Token header (@davidholsgrove)
- [#41](https://github.com/pusher/oauth2_proxy/pull/41) Added option to manually specify OIDC endpoints instead of relying on discovery
- [#83](https://github.com/pusher/oauth2_proxy/pull/83) Add `id_token` refresh to Google provider (@leki75)
- [#10](https://github.com/pusher/oauth2_proxy/pull/10) fix redirect url param handling (@dt-rush)
- [#122](https://github.com/pusher/oauth2_proxy/pull/122) Expose -cookie-path as configuration parameter (@costelmoraru)
- [#124](https://github.com/pusher/oauth2_proxy/pull/124) Use Go 1.12 for testing and build environments (@syscll)
# v3.1.0
## Release highlights
- Introduction of ARM releases and and general improvements to Docker builds
- Improvements to OIDC provider allowing pass-through of ID Tokens
- Multiple redirect domains can now be whitelisted
- Streamed responses are now flushed periodically
## Important notes
- If you have been using [#bitly/621](https://github.com/bitly/oauth2_proxy/pull/621)
and have cookies larger than the 4kb limit,
the cookie splitting pattern has changed and now uses `_` in place of `-` when
indexing cookies.
This will force users to reauthenticate the first time they use `v3.1.0`.
- Streamed responses will now be flushed every 1 second by default.
Previously streamed responses were flushed only when the buffer was full.
To retain the old behaviour set `--flush-interval=0`.
See [#23](https://github.com/pusher/oauth2_proxy/pull/23) for further details.
## Changes since v3.0.0
- [#14](https://github.com/pusher/oauth2_proxy/pull/14) OIDC ID Token, Authorization Headers, Refreshing and Verification (@joelspeed)
- Implement `pass-authorization-header` and `set-authorization-header` flags
- Implement token refreshing in OIDC provider
- Split cookies larger than 4k limit into multiple cookies
- Implement token validation in OIDC provider
- [#15](https://github.com/pusher/oauth2_proxy/pull/15) WhitelistDomains (@joelspeed)
- Add `--whitelist-domain` flag to allow redirection to approved domains after OAuth flow
- [#21](https://github.com/pusher/oauth2_proxy/pull/21) Docker Improvement (@yaegashi)
- Move Docker base image from debian to alpine
- Install ca-certificates in docker image
- [#23](https://github.com/pusher/oauth2_proxy/pull/23) Flushed streaming responses
- Long-running upstream responses will get flushed every <timeperiod> (1 second by default)
- [#24](https://github.com/pusher/oauth2_proxy/pull/24) Redirect fix (@agentgonzo)
- After a successful login, you will be redirected to your original URL rather than /
- [#35](https://github.com/pusher/oauth2_proxy/pull/35) arm and arm64 binary releases (@kskewes)
- Add armv6 and arm64 to Makefile `release` target
- [#37](https://github.com/pusher/oauth2_proxy/pull/37) cross build arm and arm64 docker images (@kskewes)
# v3.0.0
Adoption of OAuth2_Proxy by Pusher.
Project was hard forked and tidied however no logical changes have occurred since
v2.2 as released by Bitly.
## Changes since v2.2:
- [#7](https://github.com/pusher/oauth2_proxy/pull/7) Migration to Pusher (@joelspeed)
- Move automated build to debian base image
- Add Makefile
- Update CI to run `make test`
- Update Dockerfile to use `make clean oauth2_proxy`
- Update `VERSION` parameter to be set by `ldflags` from Git Status
- Remove lint and test scripts
- Remove Go v1.8.x from Travis CI testing
- Add CODEOWNERS file
- Add CONTRIBUTING guide
- Add Issue and Pull Request templates
- Add Dockerfile
- Fix fsnotify import
- Update README to reflect new repository ownership
- Update CI scripts to separate linting and testing
- Now using `gometalinter` for linting
- Move Go import path from `github.com/bitly/oauth2_proxy` to `github.com/pusher/oauth2_proxy`
- Repository forked on 27/11/18
- README updated to include note that this repository is forked
- CHANGLOG created to track changes to repository from original fork